Custom sleep bonnet
Develop a custom sleep bonnet for a private label program. The soft crown gathers into a separate smooth band with one flat fabric tie sewn at each side. Bring an opening and crown-volume reference so we can discuss the pattern, cloth and complete sample for your bulk order.
- Material direction
- Aubergine cloth proposal
- Construction
- Gathered crown / smooth band / side ties
- Branding
- Band artwork / sewn label

Specify the crown, band and ties as one sample.
Outdoor is a design category, not a performance certification. No UPF, waterproof, wind-resistance or packability rating is claimed.
Map crown fullness and gathers
On the drawing, mark the required crown depth and space above the band. Identify where the lower crown edge is drawn into the shorter band seam and mark how fullness should be distributed around the opening. Ask for the gathered crown and band on the same sample so the proposed volume can be reviewed on the intended fit reference.
Define the band and both tie roots
Give the finished band height and opening reference separately from the crown dimensions. Mark one tie root on each side and specify the width and free length of each flat tie. Identify how the ties are meant to meet so the sample can show the opening, band edge and sewn roots together.
Position artwork on the smooth band
Submit a cloth reference and finished-size artwork with the proposed position on the band. Mark clearances from the gather line and the nearest tie root. Include any label and inside attachment requirements so the complete decorated sample can be quoted and reviewed.
Prepare the bonnet quotation
Send a drawing with crown depth, gather placement, band opening and both tie attachments marked. Include the cloth reference, artwork and label requirements, quantities by finished colorway and destination. FORMBRIM’s bulk minimum is 300 pieces per style, per color. Agree the physical sample scope and any size allocation during quotation.
Make the approval specific.
Review the gather distribution, finished opening and both sewn tie roots on the same bonnet sample.
Use the checklist to identify the topics you want to discuss. Include the design name and reference version when requesting changes. A selected point becomes part of your enquiry; it does not approve a specification.
Inside proposal · review the same pattern joins and contact finish.Select the points you want to discuss. They will travel with your project brief.
0 of 4 discussion points selected
Build my gathered-crown sleep bonnet brief ↗Connect the brief with the factory.
Our Hangzhou factory was established in 2016, with 8 production lines and 200+ employees. OEM and ODM development, custom logos, labels, hangtags and packaging are available. Discuss the production route for your chosen construction with the team.

Sample development
Use the sample to resolve construction, fit and branding. Sampling is 7–10 working days; allow separately for your review and any revisions.

Every-piece inspection
We carry out 100% inspection. Agree the sample version, written requirements and design-specific review points for the order.

Brand finishing
Provide the current artwork for labels, hangtags and packaging. Identify which details vary across styles and colorways.
Factory photography from our production, sample and storage spaces.
Explore the factory ↗Prepare a quote that describes the whole product.
These concepts are starting points for development. A quotation needs a defined scope, not only a product name.

Band artwork / sewn label
- Style and color quantities
- List each finished colorway and its quantity. The minimum is 300 pieces per style, per color. Clarify any size breakdown with the team.
- Artwork and trims
- Include logo size, placement, technique preference, labels, hangtags and packaging. Indicate which files and details are still being developed.
- Schedule and destination
- Bulk production is 30–45 working days. Share your arrival target and destination; review, revisions and transport are separate stages.
- Commercial scope
- Confirm what the quote includes, the sample arrangements and any separate packaging or transport items. Pricing and specifications are agreed for your project.
Compare another direction in this family.

Canvas sun hat
A quiet all-around brim concept for a brand’s outdoor assortment. Use the canvas hand and brim angle to define the product rather than adding unnecessary hardware.
- Material direction
- Canvas direction
- Construction
- Broad all-around brim / civilian outdoor crown

Mesh-crown sun hat
A contrast between a solid brim and a visibly open-textured crown detail. The mesh placement is a construction decision; the image does not quantify airflow or cooling.
- Material direction
- Woven shell / mesh accent direction
- Construction
- Broad brim / ventilated-looking crown panel

Neck-flap sun hat
Develop neck flap hats for your private label outdoor collection. Specify flap dimensions, attachment, shell fabric and branding before sampling. Bulk MOQ: 300 pieces per style, per color. Coverage alone does not establish a protection rating.
- Material direction
- Light woven nylon-look direction
- Construction
- All-around brim / soft rear flap

Soft travel hat
A softer outdoor silhouette intended for a travel-oriented collection. Treat folding and recovery as sample questions instead of assuming the hat can be packed without changing shape.
- Material direction
- Soft woven fabric direction
- Construction
- Relaxed low crown / flexible broad brim

Brimmed fold-down earflap cap
Develop custom ear flap hats with FORMBRIM through OEM/ODM sampling. This proposal combines a six-panel woven crown and forward brim with a continuous foldable band around the sides and back, shaped to cover the ear areas. Confirm cloth, fit and both coverage states before the bulk brief; MOQ is 300 pieces per style, per color.
- Material direction
- Woven crown and ear-band proposal
- Construction
- Six-panel crown / forward brim / folding ear band

Flat-top cadet cap
Develop a custom cadet hat around a separate oval top, straight side wall and short forward brim. FORMBRIM supports OEM/ODM sampling for this construction; agree the cloth, rear finish, fit and decoration on an identified project sample.
- Material direction
- Woven cloth proposal; specification to agree
- Construction
- Flat top / straight wall / short brim

Bill-less trapper hat
Develop custom trapper hats with a bill-less sewn crown, two separately rooted long ear flaps and a separate forehead turn-up flap. FORMBRIM supports OEM/ODM sampling for this construction; review the shell, contact facing and flap-end connection together.
- Material direction
- Woven shell / smooth facing proposal
- Construction
- No brim / separate long ear flaps

Tapered flat cap
Develop custom flat caps with a low continuous upper crown, curved side pieces, a separate lower band and a short tucked peak. FORMBRIM supports OEM/ODM sampling for this construction; agree the cloth, fit, inside finish and decoration on a project sample.
- Material direction
- Warm gray woven proposal; specification to agree
- Construction
- Tapered upper / curved sides / tucked peak

Sewn beret
Develop custom berets with a circular upper disk, a separate lower annulus returning inward and a narrow opening band. FORMBRIM supports OEM/ODM sampling for this sewn construction; agree the cloth, opening, inside edge and artwork on a project sample.
- Material direction
- Deep charcoal woven proposal; specification to agree
- Construction
- Circular disk / inward annulus / narrow band

Eight-gore newsboy cap
Develop custom newsboy hats with eight shaped crown gores meeting at the apex, a separate lower band and a short front peak. FORMBRIM supports OEM/ODM pattern and sample development for this complete construction. Agree fullness, cloth, opening and inside finishing on the project sample.
- Material direction
- Gray-brown woven proposal; specification to agree
- Construction
- Eight radial gores / lower band / short peak

Center-seam durag
Work with FORMBRIM as your custom durag manufacturer. This cut-and-sew proposal joins two shaped crown halves along the center and continues into an independently hanging rear tail. Two long flat fabric ties attach at the sides. Send the crown, tail and tie references together for an OEM/ODM sample discussion.
- Material direction
- Slate-navy woven cloth proposal
- Construction
- Two crown halves / rear tail / side ties





