Outdoor hats

Custom newsboy hats

Develop custom newsboy hats with eight shaped crown gores meeting at the apex, a separate lower band and a short front peak. FORMBRIM supports OEM/ODM pattern and sample development for this complete construction. Agree fullness, cloth, opening and inside finishing on the project sample.

Material direction
Gray-brown woven proposal; specification to agree
Construction
Eight radial gores / lower band / short peak
Branding
Gore-aware artwork / inside label
Request a manufacturing quoteRead the matched buying guide
Gray-brown woven newsboy cap with eight radial crown gores meeting at the apex, a narrow lower band and short peak

Keep the eight-gores, band and peak identifiable.

Outdoor is a design category, not a performance certification. No UPF, waterproof, wind-resistance or packability rating is claimed.

01 / DEVELOPMENT PRIORITY

Eight separate gores and their apex joins

Number eight separate shaped crown gores on a top drawing and follow their radial joins into the apex. Keep the lower band and short front peak outside that count. Review top, front and rear views of one version to establish the complete crown rather than relying on a fuller outline or an optional top button. The continuous upper of a tapered flat cap, disk-and-annulus beret and top-and-wall cadet cap have different pattern relationships. Use those shapes only for a named reference, with the eight-gore drawing governing this project.

02 / DEVELOPMENT PRIORITY

Crown fullness, band and short-peak connection

Mark the crown-to-band connection, opening and short-peak root on matching profiles and inside views. Agree the intended fullness between the gore seams and the amount of crown overhang separately from peak projection. The illustrated complete rear has no adjustment hardware; it is a proposal to review with the opening and worn reference. When a proportion needs revision, identify whether it concerns gore contour, the band or the peak. Ask the technical team to explain the attachment and inside finish before retaining a local change.

03 / DEVELOPMENT PRIORITY

Cloth and seam-aware artwork

Select identifiable woven-cloth submissions before fixing composition, weight or finish. Compare their hand on the shaped crown, apex and band rather than approving by shade alone. Map crown, band, upper peak, underpeak, thread and labels as one finished colorway. Provide artwork dimensions and clearances from numbered gore seams or the band edge. Review decoration, reverse attachment and the inside contact surface on the same assembled sample, then check that the accepted crown contour remains identifiable.

04 / DEVELOPMENT PRIORITY

Order scope and sample revision

FORMBRIM’s bulk MOQ is 300 pieces per style, per color. Send the eight-gore drawing, material proposals, opening and worn references, artwork, labels and finished-colorway quantities for a quotation. Confirm size allocation and sample scope separately. Keep accepted, revise and pending decisions visible for the apex, band, peak and inside finish. Include the packing proposal and review the crown after unpacking. A request for another cloth, rear adjustment or peak shape should identify the connected features that need renewed sample review.

Physical sample review

Make the approval specific.

Inspect the eight-gore apex, crown-to-band connection and short-peak root on the same identified newsboy sample.

Use the checklist to identify the topics you want to discuss. Include the design name and reference version when requesting changes. A selected point becomes part of your enquiry; it does not approve a specification.

Inside the gray-brown newsboy cap showing crown gore joins, lower band and front peak attachmentInside proposal · review the same pattern joins and contact finish.

Select the points you want to discuss. They will travel with your project brief.

0 of 4 discussion points selected

Build my eight-gore newsboy cap brief ↗

Connect the brief with the factory.

Our Hangzhou factory was established in 2016, with 8 production lines and 200+ employees. OEM and ODM development, custom logos, labels, hangtags and packaging are available. Discuss the production route for your chosen construction with the team.

Headwear sample showroom with a discussion table

Sample development

Use the sample to resolve construction, fit and branding. Sampling is 7–10 working days; allow separately for your review and any revisions.

Sewing workstations across a factory floor

Every-piece inspection

We carry out 100% inspection. Agree the sample version, written requirements and design-specific review points for the order.

Labeled material and accessory storage shelves

Brand finishing

Provide the current artwork for labels, hangtags and packaging. Identify which details vary across styles and colorways.

Factory photography from our production, sample and storage spaces.

Explore the factory ↗

Prepare a quote that describes the whole product.

These concepts are starting points for development. A quotation needs a defined scope, not only a product name.

Close view of the gray-brown newsboy cap crown-to-band join and short-peak root
Eight-gore newsboy cap · Gray-brown woven proposal; specification to agree

Gore-aware artwork / inside label

Style and color quantities
List each finished colorway and its quantity. The minimum is 300 pieces per style, per color. Clarify any size breakdown with the team.
Artwork and trims
Include logo size, placement, technique preference, labels, hangtags and packaging. Indicate which files and details are still being developed.
Schedule and destination
Bulk production is 30–45 working days. Share your arrival target and destination; review, revisions and transport are separate stages.
Commercial scope
Confirm what the quote includes, the sample arrangements and any separate packaging or transport items. Pricing and specifications are agreed for your project.
Request a manufacturing quote

Compare another direction in this family.

Canvas sun hat design

Canvas sun hat

A quiet all-around brim concept for a brand’s outdoor assortment. Use the canvas hand and brim angle to define the product rather than adding unnecessary hardware.

Material direction
Canvas direction
Construction
Broad all-around brim / civilian outdoor crown
Read the matched buying guide
Mesh-crown sun hat design

Mesh-crown sun hat

A contrast between a solid brim and a visibly open-textured crown detail. The mesh placement is a construction decision; the image does not quantify airflow or cooling.

Material direction
Woven shell / mesh accent direction
Construction
Broad brim / ventilated-looking crown panel
Read the matched buying guide
Neck-flap sun hat design

Neck-flap sun hat

Develop neck flap hats for your private label outdoor collection. Specify flap dimensions, attachment, shell fabric and branding before sampling. Bulk MOQ: 300 pieces per style, per color. Coverage alone does not establish a protection rating.

Material direction
Light woven nylon-look direction
Construction
All-around brim / soft rear flap
Read the matched buying guide
Soft travel hat design

Soft travel hat

A softer outdoor silhouette intended for a travel-oriented collection. Treat folding and recovery as sample questions instead of assuming the hat can be packed without changing shape.

Material direction
Soft woven fabric direction
Construction
Relaxed low crown / flexible broad brim
Read the matched buying guide
Olive woven cap with a forward brim and lowered side-and-rear ear band

Brimmed fold-down earflap cap

Develop custom ear flap hats with FORMBRIM through OEM/ODM sampling. This proposal combines a six-panel woven crown and forward brim with a continuous foldable band around the sides and back, shaped to cover the ear areas. Confirm cloth, fit and both coverage states before the bulk brief; MOQ is 300 pieces per style, per color.

Material direction
Woven crown and ear-band proposal
Construction
Six-panel crown / forward brim / folding ear band
Read the matched buying guide
Gray olive cadet cap proposal with a separate flat oval top, straight side wall and short forward brim

Flat-top cadet cap

Develop a custom cadet hat around a separate oval top, straight side wall and short forward brim. FORMBRIM supports OEM/ODM sampling for this construction; agree the cloth, rear finish, fit and decoration on an identified project sample.

Material direction
Woven cloth proposal; specification to agree
Construction
Flat top / straight wall / short brim
Read the matched buying guide
Graphite trapper hat proposal without a brim, with a separate forehead flap, two long ear flaps and matching fabric ties

Bill-less trapper hat

Develop custom trapper hats with a bill-less sewn crown, two separately rooted long ear flaps and a separate forehead turn-up flap. FORMBRIM supports OEM/ODM sampling for this construction; review the shell, contact facing and flap-end connection together.

Material direction
Woven shell / smooth facing proposal
Construction
No brim / separate long ear flaps
Read the matched buying guide
Warm gray flat cap proposal with a low tapered continuous upper crown, curved side piece, lower band and short tucked peak

Tapered flat cap

Develop custom flat caps with a low continuous upper crown, curved side pieces, a separate lower band and a short tucked peak. FORMBRIM supports OEM/ODM sampling for this construction; agree the cloth, fit, inside finish and decoration on a project sample.

Material direction
Warm gray woven proposal; specification to agree
Construction
Tapered upper / curved sides / tucked peak
Read the matched buying guide
Charcoal woven beret with a circular overhanging upper disk, inward-returning lower annulus and narrow opening band

Sewn beret

Develop custom berets with a circular upper disk, a separate lower annulus returning inward and a narrow opening band. FORMBRIM supports OEM/ODM sampling for this sewn construction; agree the cloth, opening, inside edge and artwork on a project sample.

Material direction
Deep charcoal woven proposal; specification to agree
Construction
Circular disk / inward annulus / narrow band
Read the matched buying guide
Dark aubergine bonnet with a gathered crown, separate smooth band and two flat side ties

Gathered-crown sleep bonnet

Develop a custom sleep bonnet for a private label program. The soft crown gathers into a separate smooth band with one flat fabric tie sewn at each side. Bring an opening and crown-volume reference so we can discuss the pattern, cloth and complete sample for your bulk order.

Material direction
Aubergine cloth proposal
Construction
Gathered crown / smooth band / side ties
Read the matched buying guide
Slate-navy durag with a center-seam crown, hanging rear tail and two long flat side ties

Center-seam durag

Work with FORMBRIM as your custom durag manufacturer. This cut-and-sew proposal joins two shaped crown halves along the center and continues into an independently hanging rear tail. Two long flat fabric ties attach at the sides. Send the crown, tail and tie references together for an OEM/ODM sample discussion.

Material direction
Slate-navy woven cloth proposal
Construction
Two crown halves / rear tail / side ties
Read the matched buying guide
YOUR COLLECTION / OUR NEXT CONVERSATION

Make this shape your starting point.

Describe the design you are considering and the changes you would like to make. We can discuss material, branding and the sample brief together.

Project brief
Gray-brown woven newsboy cap with eight radial crown gores, a lower band and short peakCobalt and ivory embroidery thread spools
FORMBRIMNewsboy capOEM / ODM

Bring your shape, artwork and quantities together.

YOUR NEXT CONVERSATION
  1. Chosen silhouette or design
  2. Changes to fabric and artwork
  3. Quantity for each color
MOQ
300 pieces per style, per color
Sample
7–10 working days
Production
30–45 working days

Prefer a direct conversation?

WhatsApp +86 181 2050 6050 ↗[email protected]

Fields marked * are required. Other details can be decided together.

Include + and your country code, followed by your WhatsApp number.
Add project details (optional)Style, quantities, timing & links
MOQ: 300 pieces per style, per color. List different styles and color quantities in your project description.
Share an http(s) link to your artwork or tech pack and check that we can open it.
PDF, JPG or PNG. Up to 3 files, 5 MB each and 10 MB total. To send files through WhatsApp, attach them in that chat.
Continue on WhatsApp

Your filled-in details will open in WhatsApp. Review them there before sending.